Ostoskorissa tuotteita: 0 kpl
Etusivu Uutuudet Tarjoukset Yhteydenotto Oma asiakastili facebook Poistotuotteet
Tuotteen tiedot

SKYRC Extreme BMA-01 Brushless Motor Checker

119.00€  135.00€
Valmistaja EMAX
Varastossa: 1 kpl


Kysy lisää tuotteesta

SKYRC motor analyzer is a precision electronic device that is especially designed for measuring the KV value, RMP, current drawn, motor timing, vibration noise level and checking the function of hall effect sensors of a brushless motor. It comes with a 2X16 characters LCD that is able to display real time measuring value of either sensor or sensor-less brushless motor.


KV(RPM per Volt) Show the rotor RPM/Volt at a certain throttle power level. U(VOLT) Show the input voltage to motor checker. RPM(Revolution Per Minutes) Show the rotor revolution at a certain throttle power level. I(AMP) Show the current drawn by the motor at a certain throttle power level.

MOTOR TIMING: Physical endbell timing, usually between 0 and 70 degrees, requires tools to rotate the sensor board.


NOISE LEVEL: Poor assembly motor, inferior bearing and unbalanced rotor can generate a vibration. Whenever a motor in air vibrates, it causes compression waves in the air. These waves move away from the motor as sound or noise. Vibration noise of motor is adverse the performance of motor. By measure the noise level of motors, you can select the less noise motor. The decibel (dB) is a logarithmic unit used to express noise level in this motor analyzer.

Phase A, B and C Sensor Timing: Show the actual timing of three sensor elements as above picture.

Input Voltage: 7.4-8.4V (Suggested to Use 7.4V 2S 1P LiPo Battery)
LCD Display Screen: Blue Backlight Background, White Text, 16 Characters X 2 Lines
KV Value Accuracy: +/- 3%
Motor Timing Accuracy: +/- 4%
Motor Timing Range: 0-70 Degree
Noise Level Measurement Range: 60dB - 120dB
Supported Motor: Sensor or Sensor-less Brushless Motor (2 Poles to 36 Poles)
Dimension: 136.5 x 80.6 x 24.5mm
Net Weight: 282gram (Without Cabel)

- KV Measurement
- RPM Measurement
- Voltage Measurement
- Ampere Measurement
- Motor Timing Checking 1) Average Timing 2) Phase A, B, C Timing
- Noise Level
- Hall Effect Sensor Test

Tuote lisätty: 30.08.2016.
Tutustu myös seuraaviin tuotteisiin
Tail motor holder
Tail motor holder
Phantom Canopy: B450 X
Phantom Canopy: B450 X
WALKERA (HM-F210-Z-15) Camera Guard (Black)
WALKERA (HM-F210-Z-15) Camera Guard (Black)
D4xD12xL29mm Fuel Filter
D4xD12xL29mm Fuel Filter
2 Pairs Gemfan 4045 Bullnose Carbon Nylon 2CW/2CCW Propeller Prop For Multicopter
2 Pairs Gemfan 4045 Bullnose Carbon Nylon 2CW/2CCW Propeller Prop For Multicopter
Metal tail drive gear assembly
Metal tail drive gear assembly
0 kpl
Kirjaudu sisään
Nouto kauppiaan toimipisteestä (Haukiputaalta)0.00€
Nouto Postista6.89€
Toimituskulut päivittyvät automaattisesti ostoskorin sisällön mukaan. Yli 150 euron tilaukset Suomeen ilman toimituskuluja. Yli 150 € tilauksesta maksamme toimituskulut Suomessa.
Techone Power (ilman tekniikkaa) Techone Power (ilman tekniikkaa)
19.00€  29.00€
Spektrum Aircraft Telemetry RPM Sensor and Bracket Spektrum Aircraft Telemetry RPM Sensor and Bracket
18.00€  23.99€
Blade Nano QX BNF Blade Nano QX BNF
29.00€  79.00€
Anna tuotehaun hakusana
Laajennettu haku