Jeti Advance 30 Pro controller

These controllers contain a sum of experiences accumulated during many years of development work on our motor control equipment.The Advance PRO controllers comply with all ambi-tious expectations of users and in connection with the new programming card ProgCard PRO they come up to these expextations.Several controllers of this family are equipped with BEC voltage control systems for receivers and servos. Controllers with the labelling SB contain switch mode. BEC voltage regulators with a voltage of 5,5 V. Controllers without BEC are labelled Opto and must be operated with a separate receiver and servo battery as for instance 4 x NiXX cells or with an external voltage regulator like the MAXBEC. Controllers with the marking HS are special designs optimized for high speed motors (up to 200.000 rpm/2-pole motors).

PROG CARD PRO

The programming cards are set for easy and fast adjustments of the ADVANCE control-ler family. They fundamentally extend the setting possibilities and handling comfort of the controllers. The new programming card is compatible with the controller family ADVANCE Plus, on the other hand controllers ADVANCE Pro are compatible with the programming card ProgCard Plus.

Setting possibilities of the ADVANCE Pro controller with the aid of the programming card PROG CARD PRO:
• Brake – off/medium/fast
• Timing – automatic/high advance/low advance
• Acceleration – high/medium/low
• Type of cells: NiCd/NiMH, Li-Pol/Li-Ion, Li-Fe
• Cut-off voltage of the controller – higher/medium/lower
• Motor cut-off mode when voltage decreases below the
set cut-off voltage of the controller – immediate cut-off/ continual power decrease
• Direction of rotation – change of direction of rotation

Sisältää liittimet.