Ostoskorissa tuotteita: 0 kpl
Etusivu Uutuudet Tarjoukset Yhteydenotto Oma asiakastili facebook Poistotuotteet
Tuoteryhmät
Valmistajat
Tietosivut
Maksutavat
Tuotteen tiedot

Zenoah ZP 62cc Gas Engine

479.00€
Valmistaja Horizonhobby
Tuotenumero ZENEP62
Varastossa: 1 kpl

Määrä:

Kysy lisää tuotteesta


Key Features

  • 4.8-7.4V LiPo-ready electronic ignition with variable timing, no regulator needed
  • All up weight savings of 10 oz compared to a magneto style engine
  • The proven and efficient ignition system only draws 450mAh, which allows for a smaller battery and longer flight times between charges
  • Increased power band compared to magneto engines
  • Aluminum carburetor arms for choke and throttle allow for easy servo hookup
  • Custom-machined prop drives with grey anodizing
  • Lightweight mufflers included and purpose-built for quieter operation

Overview

Easy starts. Incredible fuel efficiency. Legendary reliability of Zenoah™ engines. You’ll get it all, plus power to spare, with ZP electronic ignition engines that share many of the core components used in world-famous Zenoah magneto engines. And, like the magneto engines, they’re built for modelers who value dependability and ease of use above all else.

What sets ZP engines apart is their sophisticated electronic ignition system that saves weight and makes hand starts easy. The system can be powered with everything from 4.8V Ni-Cd or Ni-MH packs to 2S 7.4V Li-Pos. No power regulators are required, and the current draw is so low, you’ll be able to use smaller capacity battery packs and save weight or go with bigger packs and enjoy more flights between charges.

Because the electronic ignition system eliminates the need for magnetos or a PTO shaft, ZP engines are significantly lighter as well. This reduced weight coupled with their impressive torque numbers make it possible to achieve thrilling power-to-weight performance.

Benchmark Prop:22 x 10 APC @ 7,800 rpm, 22 x 10 APC @ 7,800 rpm
Bore:1.90 in (47.5mm), 1.90 in (47.5mm)
Crankshaft Threads:M10 x 1.25, M10 x 1.25
Cylinder Type:Ringed, Nikasil-plated
Cylinders:Single
Displacement:3.78 cu. in. (62.00 cc), 3.78 cu. in. (62.00 cc)
Engine (Only) Weight:62 oz (1.8 kg), 62 oz (1.8 kg)
Fuel:32:1 Gas/Oil mix
HP:6.0 hp @ 7200 rpm, 6.0 hp @ 7200 rpm
Muffler Type:Custom can design
Muffler Weight:5 oz (142 g)
Prop Range:20 x 8 - 22 x 10
RPM Range:2,000–8,500 rpm
Stroke:1.40 in (35.0mm), 1.40 in (35.0mm)
Tuote lisätty: 02.04.2015.
Tutustu myös seuraaviin tuotteisiin
Crack POWER 3S 360mah 25~50C
Crack POWER 3S 360mah 25~50C
WALKERA (HM-F210-Z-17) Front Support Frame
WALKERA (HM-F210-Z-17) Front Support Frame
Landing Skid (left and right): 120SR
Landing Skid (left and right): 120SR
5x8x2mm Radial Bearing: 180 CFX
5x8x2mm Radial Bearing: 180 CFX
Dampner Set (4) 200 S
Dampner Set (4) 200 S
Spindle Set: 200 SR X
Spindle Set: 200 SR X
Ostoskori
0 kpl
Kirjaudu sisään
Sähköpostiosoite:
Salasana:
Toimitustavat
Nouto kauppiaan toimipisteestä (Haukiputaalta)0.00€
Nouto Postista4.90€
Toimituskulut päivittyvät automaattisesti ostoskorin sisällön mukaan. Yli 150 euron tilaukset Suomeen ilman toimituskuluja. Yli 150 € tilauksesta maksamme toimituskulut Suomessa.
Tarjoukset
Walkera Rodeo 150 BNF Walkera Rodeo 150 BNF
149.00€  239.00€
Blade Nano QX RTF Blade Nano QX RTF
89.00€  119.00€
Hyperion G3 VX - 6S 5000mAh 35C, 5C lataus 2S+4S Split Wired Hyperion G3 VX - 6S 5000mAh 35C, 5C lataus 2S+4S Split Wired
109.00€  166.90€
Tuotehaku
Anna tuotehaun hakusana
 
Laajennettu haku