Ostoskorissa tuotteita: 0 kpl
Etusivu Uutuudet Tarjoukset Yhteydenotto Oma asiakastili facebook Poistotuotteet
Tuoteryhmät
Valmistajat
Tietosivut
Maksutavat
Tuotteen tiedot

Zenoah ZP 26cc Gas Engine

299.00€  365.00€
Valmistaja Horizonhobby
Tuotenumero ZENEP26
Varastossa: 1 kpl

Määrä:

Kysy lisää tuotteesta


Key Features

  • 4.8-7.4V LiPo-ready electronic ignition with variable timing, no regulator needed
  • All up weight savings of 14.6 oz compared to a magneto style engine
  • The proven and efficient ignition system only draws 450mAh, which allows for a smaller battery and longer flight times between charges
  • Increased power band compared to magneto engines
  • Aluminum carburetor arms for choke and throttle allow for easy servo hookup
  • Custom-machined prop drives with grey anodizing
  • Lightweight mufflers included and purpose-built for quieter operation

Overview

Easy starts. Incredible fuel efficiency. Legendary reliability of Zenoah™ engines. You’ll get it all, plus power to spare, with ZP electronic ignition engines that share many of the core components used in world-famous Zenoah magneto engines. And, like the magneto engines, they’re built for modelers who value dependability and ease of use above all else.

What sets ZP engines apart is their sophisticated electronic ignition system that saves weight and makes hand starts easy. The system can be powered with everything from 4.8V Ni-Cd or Ni-MH packs to 2S 7.4V Li-Pos. No power regulators are required, and the current draw is so low, you’ll be able to use smaller capacity battery packs and save weight or go with bigger packs and enjoy more flights between charges.

Because the electronic ignition system eliminates the need for magnetos or a PTO shaft, ZP engines are significantly lighter as well. This reduced weight coupled with their impressive torque numbers make it possible to achieve thrilling power-to-weight performance

                
Benchmark Prop: APC 16 x 8 @ 8,700–8.900 rpm, APC 16 x 8 @ 8,700–8.900 rpm
Bore: 1.34 in (34mm), 1.34 in (34mm)
Carb Type: Walbro
Crankshaft Threads: M8 x 1.25
Cylinder Type: Ringed, Nikasil-plated
Cylinders: Single
Displacement: 1.55 cu. in. (25.40 cc), 1.55 cu. in. (25.40 cc)
Engine (Only) Weight: 37.3 oz (1.1 kg), 37.3 oz (1.1 kg)
Fuel: Gasoline/Oil Mix 32:1
HP: 2.4 hp @ 8900 rpm, 2.4 hp @ 8900 rpm
Muffler Type: Custom Can
Prop Range: 15 x 8 - 17 x 6
RPM Range: 1,800–10,000
Stroke: 1.10 in (28mm), 1.10 in (28mm)
Total Weight: 46.0 oz (1.3 kg), 46.0 oz (1.3 kg)

 

Tuote lisätty: 02.04.2015.
Tutustu myös seuraaviin tuotteisiin
Emax 14x8 Taittuvalapaiset potkurit
Emax 14x8 Taittuvalapaiset potkurit
Dynamite Thread Locker (5.67g)
Dynamite Thread Locker (5.67g)
APC Thin E 16x12
APC Thin E 16x12
Inner Shaft Main Gear: BMCX/2/T,FHX,MH-35
Inner Shaft Main Gear: BMCX/2/T,FHX,MH-35
Nylon Clevises Φ3×L22mm 1kpl
Nylon Clevises Φ3×L22mm 1kpl
High-Performance Main Rotor Blade w/Hdwe: mCP X BL
High-Performance Main Rotor Blade w/Hdwe: mCP X BL
Ostoskori
0 kpl
Kirjaudu sisään
Sähköpostiosoite:
Salasana:
Toimitustavat
Nouto kauppiaan toimipisteestä (Haukiputaalta)0.00€
Nouto Postista4.90€
Toimituskulut päivittyvät automaattisesti ostoskorin sisällön mukaan. Yli 150 euron tilaukset Suomeen ilman toimituskuluja. Yli 150 € tilauksesta maksamme toimituskulut Suomessa.
Tarjoukset
FMS Zero A6M3 1400mm  ARF FMS Zero A6M3 1400mm ARF
269.00€  299.00€
Zenoah ZP 26cc Gas Engine Zenoah ZP 26cc Gas Engine
299.00€  365.00€
1320MHz Helix antennin masto/tripodi -adapteri 1320MHz Helix antennin masto/tripodi -adapteri
10.00€  21.50€
Tuotehaku
Anna tuotehaun hakusana
 
Laajennettu haku