Ostoskorissa tuotteita: 0 kpl
Etusivu Uutuudet Tarjoukset Yhteydenotto Oma asiakastili facebook Poistotuotteet
Tuoteryhmät
Valmistajat
Tietosivut
Maksutavat
Tuotteen tiedot

Zenoah ZP 20cc Gas Engine

325.00€
Valmistaja Horizonhobby
Tuotenumero ZENEP20
Varastossa: 1 kpl

Määrä:

Kysy lisää tuotteesta


Key Features

  • 4.8-7.4V LiPo ready electronic ignition with variable timing—no regulator needed
  • All up weight savings of 2.8 ounces compared to a magneto style engine
  • The proven and efficient ignition system only draws 450mAh, which allows for a smaller battery and longer flight times between charges
  • Increased power band compared to magneto engines
  • Aluminum carburetor arms for choke and throttle allow for easy servo hookup
  • Custom-machined prop drives with grey anodizing
  • Lightweight mufflers included and purpose-built for quieter operation

Overview

Easy starts. Incredible fuel efficiency. Legendary reliability of Zenoah™ engines. You’ll get it all, plus power to spare, with ZP electronic ignition engines that share many of the core components used in world-famous Zenoah magneto engines. And, like the magneto engines, they’re built for modelers who value dependability and ease of use above all else.

What sets ZP engines apart is their sophisticated electronic ignition system that saves weight and makes hand starts easy. The system can be powered with everything from 4.8V Ni-Cd or Ni-MH packs to 2S 7.4V Li-Pos. No power regulators are required, and the current draw is so low, you’ll be able to use smaller capacity battery packs and save weight or go with bigger packs and enjoy more flights between charges.

Because the electronic ignition system eliminates the need for magnetos or a PTO shaft, ZP engines are significantly lighter as well. This reduced weight, coupled with their impressive torque numbers, makes it possible to achieve thrilling power-to-weight performance.

Benchmark Prop: APC 16 x 6 @ 9000 rpm, APC 16 x 6 @ 9000 rpm
Bore: 1.26 inch (32mm), 1.26 inch (32mm)
Carb Type: Walbro, Walbro
Crankshaft Threads: 8 x 1.25mm, 8 x 1.25mm
Cylinder Type: Ringed, Nikasil-plated
Cylinders: Single
Displacement: 1.22 cu. in. (20.00 cc), 1.22 cu. in. (20.00 cc)
Engine (Only) Weight: 33 oz (0.9 kg), 33 oz (0.9 kg)
Fuel: Gas/Oil Mix 32:1
HP: 2.1 hp @ 9000 rpm, 2.1 hp @ 9000 rpm
Muffler Type: Custom Can (included)
Muffler Weight: 5.0 oz (146 g)
Prop Range: 15 x 8 - 16 x 8
RPM Range: 1,400–10,000
Stroke: 0.98 inch (25mm), 0.98 inch (25mm)
Total Weight:

41.6 oz (1.2 kg) with muffler, ignition and mount, 41.6 oz (1.2 kg) with muffler, ignition and mount 

   

 

 

Tuote lisätty: 02.04.2015.
Tutustu myös seuraaviin tuotteisiin
Tail Drive Shaft Lower Bearing Block/Mount: B450
Tail Drive Shaft Lower Bearing Block/Mount: B450
UFO-MX400-Z-04 Fixing board (upper)
UFO-MX400-Z-04 Fixing board (upper)
Emax Electric Ducted Fan With Motor Ø89mm KV1900 (6-blade)
Emax Electric Ducted Fan With Motor Ø89mm KV1900 (6-blade)
Emax 14x8 Taittuvalapaiset potkurit
Emax 14x8 Taittuvalapaiset potkurit
QR X350PRO-Z-09 GPS Module
QR X350PRO-Z-09 GPS Module
70mm/ 2.75 inches Aluminum Spinner (Standard Polishing Surface)
70mm/ 2.75 inches Aluminum Spinner (Standard Polishing Surface)
Ostoskori
0 kpl
Kirjaudu sisään
Sähköpostiosoite:
Salasana:
Toimitustavat
Nouto kauppiaan toimipisteestä (Haukiputaalta)0.00€
Nouto Postista4.90€
Toimituskulut päivittyvät automaattisesti ostoskorin sisällön mukaan. Yli 150 euron tilaukset Suomeen ilman toimituskuluja. Yli 150 € tilauksesta maksamme toimituskulut Suomessa.
Tarjoukset
Walkera Rodeo 150 BNF Walkera Rodeo 150 BNF
149.00€  239.00€
Full HD Sports DV 1080P Mini Sports DV Waterproof Sports DV Full HD Sports DV 1080P Mini Sports DV Waterproof Sports DV
39.00€  79.90€
Hangar 9 P-51 Mustang 40 ARF Hangar 9 P-51 Mustang 40 ARF
199.00€  229.00€
Tuotehaku
Anna tuotehaun hakusana
 
Laajennettu haku