Ostoskorissa tuotteita: 0 kpl
Etusivu Uutuudet Tarjoukset Yhteydenotto Oma asiakastili facebook Poistotuotteet
Tuoteryhmät
Valmistajat
Tietosivut
Maksutavat
Tuotteen tiedot

JETI ECO 18

22.00€
Valmistaja Model Motors
Tuotenumero
Varastossa: 1 kpl

Määrä:

Kysy lisää tuotteesta


The Jeti Eco 18 brushless speed controller for brushless motors is a simple and economical speed controller supporting 2-3 cell lithium polymer batteries (or 6-10 NiCd/NiMH cells) and offers control of the most common programming options through simple jumper-plug selection.

The Jeti Eco 18 amp controller features a built-in linear BEC. This provides the receiver and servos with a 5.0v power-supply directly from your 2 or 3 cell Li-Po battery, eliminating the need for a separate receiver battery. This controller is not fitted with an arming switch. Always disconnect batteries when not in use.

Jeti Eco brushless motor controllers also feature a power cut-off system, which cuts power to the motor of your RC plane when the voltage of your lithium battery indicates that it is nearly depleted. This feature conserves power for your receiver and servos, allowing you short bursts of motor power and full control of your radio controlled model to bring it down safely.

Jeti 'Eco' speed controllers feature special software, which allows precise control of timing automatically. No programming is required to achieve the correct timing for your brushless motor.

Built-in temperature overload protection cuts power to your brushless motor, should the temperature of the controller exceed 100°C. This feature is designed to prevent failure of the controller due to over-heating. Always ensure a good supply of air flowing over the controller to maintain an even temperature during flight.

The Jeti Eco 18 supports four modes of operation, selected using the included jumper plug: -

  • Mode 1:
    • Battery Type: NiCd/NiMH Batteries
    • Brake: OFF
    • Cut-off Type: Slow down
    • Cut-off Voltage: 5 Volts or 0.7v/cell
  • Mode 2:
    • Battery Type: NiCd/NiMH Batteries
    • Brake: ON
    • Cut-off Type: Stop
    • Cut-off Voltage: 5 Volts or 0.7v/cell
  • Mode 3:
    • Battery Type: Li-Po/Li-Ion Batteries
    • Brake: OFF
    • Cut-off Type: Slow down
    • Cut-off Voltage: 6 volts for 2-cells, 9 volts for 3-cells
  • Mode 4:
    • Battery Type: Li-Po/Li-Ion Batteries
    • Brake: ON
    • Cut-off Type: Stop
    • Cut-off Voltage: 6 volts for 2-cells, 9 volts for 3-cells

No. of cells (LiPo)  

2-3

No. of cells (LiFe)  

 

No. of cells (NiXX)  

6-10

Max. continuous current  

18.0A

Dimensions (in mm)  

32x23x7

Continuous BEC Current  

2.0A

Max BEC Current  

3.0A

Jeti Box Compatible (JBC)  

No

BEC Type  

Linear BEC

Weight  

21.0g (0.7oz.)

Toimitetaan ilman liittimiä.

Tuote lisätty: 25.02.2013.
Tutustu myös seuraaviin tuotteisiin
1047 CW, CCW Carbon Fibre propellers(DJI)
1047 CW, CCW Carbon Fibre propellers(DJI)
Servo Control Linkage Set: 180 CFX
Servo Control Linkage Set: 180 CFX
EMAX RS2205 Motor for FPV Racing (KV2600) CCW Tread/CW Rotation
EMAX RS2205 Motor for FPV Racing (KV2600) CCW Tread/CW Rotation
Prop Adapter For EMAX MT1804/MT1806 CCW (1pc)
Prop Adapter For EMAX MT1804/MT1806 CCW (1pc)
Nighthawk 200 Parts - All the screws And Post
Nighthawk 200 Parts - All the screws And Post
EMAX Cooling Series Multicopter Motor MT2206-1900KV (CCW thread)
EMAX Cooling Series Multicopter Motor MT2206-1900KV (CCW thread)
Ostoskori
0 kpl
Kirjaudu sisään
Sähköpostiosoite:
Salasana:
Toimitustavat
Nouto kauppiaan toimipisteestä (Haukiputaalta)0.00€
Nouto Postista4.90€
Toimituskulut päivittyvät automaattisesti ostoskorin sisällön mukaan. Yli 150 euron tilaukset Suomeen ilman toimituskuluja. Yli 150 € tilauksesta maksamme toimituskulut Suomessa.
Tarjoukset
Blade mSR S RTF with SAFE Blade mSR S RTF with SAFE
139.00€  159.90€
Proboat Recoil 17" Self-Righting Deep V Brushless: RTR Proboat Recoil 17" Self-Righting Deep V Brushless: RTR
199.00€  219.00€
Blade 200 SR X BNF Blade 200 SR X BNF
189.00€  239.99€
Tuotehaku
Anna tuotehaun hakusana
 
Laajennettu haku