Ostoskorissa tuotteita: 0 kpl
Etusivu Uutuudet Tarjoukset Yhteydenotto Oma asiakastili facebook Poistotuotteet
Tuoteryhmät
Valmistajat
Tietosivut
Maksutavat
Tuotteen tiedot

Jeti Advance 30 Pro controller

45.00€
Valmistaja Model Motors
Tuotenumero
Varastossa: 3 kpl

Määrä:

Kysy lisää tuotteesta


Jeti Advance Pro controllers

These controllers contain a sum of experiences accumulated during many years of development work on our motor control equipment.The Advance PRO controllers comply with all ambi-tious expectations of users and in connection with the new programming card ProgCard PRO they come up to these expextations.Several controllers of this family are equipped with BEC voltage control systems for receivers and servos. Controllers with the labelling SB contain switch mode. BEC voltage regulators with a voltage of 5,5 V. Controllers without BEC are labelled Opto and must be operated with a separate receiver and servo battery as for instance 4 x NiXX cells or with an external voltage regulator like the MAXBEC. Controllers with the marking HS are special designs optimized for high speed motors (up to 200.000 rpm/2-pole motors).

PROG CARD PRO


The programming cards are set for easy and fast adjustments of the ADVANCE control-ler family. They fundamentally extend the setting possibilities and handling comfort of the controllers. The new programming card is compatible with the controller family ADVANCE Plus, on the other hand controllers ADVANCE Pro are compatible with the programming card ProgCard Plus.

Setting possibilities of the ADVANCE Pro controller with the aid of the programming card PROG CARD PRO:
• Brake – off/medium/fast
• Timing – automatic/high advance/low advance
• Acceleration – high/medium/low
• Type of cells: NiCd/NiMH, Li-Pol/Li-Ion, Li-Fe
• Cut-off voltage of the controller – higher/medium/lower
• Motor cut-off mode when voltage decreases below the
set cut-off voltage of the controller – immediate cut-off/ continual power decrease
• Direction of rotation – change of direction of rotation

Sisältää liittimet.

Tuote lisätty: 24.01.2013.
Lisätietoja tuotteesta saat klikkaamalla tästä.
Tutustu myös seuraaviin tuotteisiin
PROPELLER PROTECTION COVER (BLACK) HUBSAN X4
PROPELLER PROTECTION COVER (BLACK) HUBSAN X4
Main Rotor Hub w/hardware: nCP X
Main Rotor Hub w/hardware: nCP X
FBL 3-in-1 Unit: Nano CP S
FBL 3-in-1 Unit: Nano CP S
D1.8mm Linkage Stoppers 4kpl
D1.8mm Linkage Stoppers 4kpl
1.4x4x2 Bearing (4)
1.4x4x2 Bearing (4)
M3×L33mm Close Loop Extenders (10pcs)
M3×L33mm Close Loop Extenders (10pcs)
Ostoskori
0 kpl
Kirjaudu sisään
Sähköpostiosoite:
Salasana:
Toimitustavat
Nouto kauppiaan toimipisteestä (Haukiputaalta)0.00€
Nouto Postista4.90€
Toimituskulut päivittyvät automaattisesti ostoskorin sisällön mukaan. Yli 150 euron tilaukset Suomeen ilman toimituskuluja. Yli 150 € tilauksesta maksamme toimituskulut Suomessa.
Tarjoukset
Blackjack 24-inch Catamaran Brushless: RTR Blackjack 24-inch Catamaran Brushless: RTR
179.00€  295.90€
E-flite UMX P3 Revolution BNF Basic E-flite UMX P3 Revolution BNF Basic
109.00€  159.90€
Hangar 9 EXTRA 330SC 60E ARF Hangar 9 EXTRA 330SC 60E ARF
359.00€  419.00€
Tuotehaku
Anna tuotehaun hakusana
 
Laajennettu haku