Few aircraft have influenced aerobatic aviation with greater impact than those built by Walter Extra. In the full-scale arena, performance, quality and luxury go hand-in-hand with the aircraft they build. To the RC enthusiast, the Extra platform has proven moreover that there’s nothing more capable in both the precision and 3D realms. Designed after the most modern and highest performance Extra Aircraft variant, the Hangar 9® Extra 330SC 60e is specially designed to deliver performance versatility for which the design is known, but with the unlimited maneuverability only possible through model aviation.
The Hangar 9 Extra 330SC 60e ARF is an aerobatic marvel that’s ideal for the experienced aerobatic pilot. Designed by the only International Extreme Flight Championships (XFC) airplane pilot to win three years in a row, Seth Arnold used his experience with the Extra to make a practical aerobat that excels in both precision and 3D maneuvers. Material choices, structural engineering, airfoil and area optimization come together in a very lightweight platform to deliver an aerobatic experience hard-ball 3D pilots and precision fanatics can appreciate. When combined with the recommended E-flite® and Spektrum™ accessories, the Extra 330SC 60e is sure to be your choice for aerobatic thrills.
When you go to choose a transmitter, receiver and servos required for a quality airplane like this Hangar 9® Extra 330SC 60e model, consider all the advantages genuine Spektrum™ technology gives you. Not only will you possess a proven radio system at a great price, you’ll get the safety benefits that only ModelMatch™ and SmartSafe™ features can give. In addition, the Bind-N-Fly® technology built into every Spektrum receiver and transmitter entitles you instant access to an entire fleet of aircraft that can be ready to fly in the time it takes to charge a flight battery. Plus, having a genuine Spektrum transmitter means you can also take advantage of the incredible control innovative AS3X® flight stabilization technology offers.
Carbon fiber landing gear and wing tube
Components made from carbon fiber are significantly stronger and have a lighter weight than their metal counterparts and benefit the most in high stress areas such as the landing gear and wing.
Large 3D control surfaces
The laser-cut all wood construction is engineered to provide the lightest wing loading possible so that the oversized ailerons, elevators and rudder can offer incredible 3D maneuverability.
Tool-less Field Assembly
The removable Side Force Generators conveniently attach to each wing tip with nylon thumb-screws.
Designed by three-time XFC Champion Seth Arnold
Excellent precision and 3D performance
Engineered around the E-flite Power 60B outrunner and 6S Li-Po power
Lightweight, laser-cut balsa and plywood construction
Carbon-fiber landing gear and wing tube
Large control surfaces with double-beveled hinge lines
Two piece, plug-in wings
UltraCote® film matching, fiberglass cowl and wheel pants
Large hatch with quick-release latch
Removable Side-Force Generators (included)
Ball-link connectors and fiberglass control horns
Complete, high-quality hardware pack (included)
Wingspan: 65.5 in (166cm)
Overall Length: 63.7 in (162cm)
Wing Area: 870 sq. in. (56 sq dm)
Flying Weight: 7.75–8.60 lb (3.5–3.9 kg)
Motor Size: 60 Size Electric
Radio: Spektrum DX6 minimum
Servos: 2 × Spektrum 5060s (aileron); 2 × Spektrum 6220 (elevator/rudder)
Trim Scheme Colors: True Red, Pearl Charcoal, Silver, White
CG (center of gravity): 2.875–3.5 in (73–89mm) aft of leading edge at wing tip
Prop Size: 17×7E
Spinner Size: 3 in Spinner
Speed Control : 80 Amp minimum
Recommended Battery: E-flite 4400mAh 6S 22.2V 30C LiPo, 10AWG EC5
Approx. Flying Duration: 5 minutes
Assembly Time: 5-7 Hours
Is Assembly Required: Yes
Lennokki toimitetaan ilman tekniikkaa.